For pressurised Gas Supply (and Water or Sewage duties at 63mm and below)

GPS PE Pipe Systems PE80 Pipe for gas, water and industrial applications has always been manufactured from MDPE rather than HDPE PE80. MDPE has a higher long term stress crack resistance than traditional HDPE PE80.

Our traditional single layer pipe is extruded in the following colours:-

Light Blue - For potable water supply below the ground
Yellow - For gas supply below the ground
Black - For global water and gas supplies, UK potable water supplies above the ground and industrial (sewerage, mining, and quarry) applications above and below the ground.




*Maximum Gas Pressure Ratings for PE80 are as follows:-
SDR11 - 5.5 bar
SDR13.6 - 4.0 bar
SDR17.6 - 3.0 bar

Key Product Information

• Available in Gas 20mm in SDR 9 coils
• Available in Gas coils in 25mm - 180mm (SDR 11), 63mm - 75mm (SDR 13.6) and 90mm - 180mm (SDR 17.6)
• Available in Gas 6m & 12m lengths in 90mm - 355mm (SDR 11), 63mm - 75mm (SDR13.6) and 90mm - 560mm (SDR17.6)
• Available in Blue & Black in 20mm in SDR 9 Coils (25 - 150m)
• Available in Blue & Black 25mm - 63mm in SDR 11 Coils (25 - 150m)
• Approved to BS6572 - 1985, BS6730 - 1986 and GIS/PL2 - Part 2 2006
• Available in Blue & Black in 63mm in SDR 11 in 6m & 12m lengths

Features and Benefits

• No corrosion in adverse soil conditions
• Good chemical and abrasion resistance
• Flexible and light weight with a tolerance to ground movement
• Easier installation and maintenance procedures over alternative materials
• No deterioration of hydraulic performance over time