Electrofusion Fittings

DuraFuse electrofusion fittings are available in PE100 black and blue and PE80 yellow for gas applications. They are suitable for jointing PE80 and PE100 pipes and fittings.

Each fitting has a barcode to allow Electrofusion Control Units (ECU's) to read information such as Product Type and Size, Fusion Time and Cooling Time to ensure quick and easy installation. Please note that fittings can be jointed by electrofusion either in manual mode or by scanning their integral barcode label.

Key Product Information

• Couplers in sizes 20mm - 500mm
• Excess Flow Valves to prevent gas leakages - pre-assembled into 32mm electrofusion couplers 32 x 25mm electrofusion reducers
• Top Loading Tapping Tees (PE80) in sizes 63 x 32mm - 225-315 x 32mm and 90 x 63mm to 315 x 63mm
• Under Clamping Branching Saddles in sizes 40 x 20mm - 200 x 63mm
• Purge and Bagging Saddles in sizes 63mm - 315mm
• 90° and 45° Elbows in sizes 20mm - 180mm
• Equal Tees in sizes 20mm - 180mm
• End Caps in sizes 20mm - 315mm
• Transition Couplers and 90° and 45° Elbows in sizes 25mm x ¾ inch to 63mm x 2 inch
• Duck Foot Bends in sizes 63 x 80mm - 180 x 80mm
• Reducers in sizes 25 x 20mm - 180 x 125mm
• Top Loading Branching Saddles in sizes 63 x 63mm - 110 x 63mm
• Flanged Branch Tees in sizes 90 x 80mm - 180 x 150mm
• Top Loading Ranged Tapping Tees (for gas only) in sizes 63 x 32mm - 225-315 x 32mm
• Under Clamping Tapping Tees in sizes 90 x 32mm to 180 x 32mm

Features and Benefits

• DuraFuse electrofusion fittings are easy to use and provide a rapid and convenient method of joining polyethylene pipes
• Extensive range of size and shape options
• The design of the DuraFuse fittings and the positioning of the heating coils ensure that the fusion cycle forms a joint of optimum strength and consistency